One of the most crucial things to get a top watch is the situation. This is what protects the inside. According to theories in watchmaking, the depth of this circumstance is proportional to its water resistance. Which explains why the Sea Dwellers used from the challenges were thick. The Ringlock System One wouldn’t dare to use those watches as a daily driver due to the thickness. To answer the issue, the situation structure was redesigned by Rolex and called it the Ringlock System. With this system, three elements absorb the strain. These will be the sapphire crystal (5.5mm thick), the case back made of Grade 5 titanium (3.28mm thick), and the inner ring made of Biodur 108 steel. Along with this, the system is encompassed by 904L steel. As always, Rolex chose the materials . The Biodur 108 steel is three times greater stress evidence compared to the case to exemplify. Meanwhile, the Grade 5 titanium is four times more durable. GAS ESCAPE VALVE If you’d observe the words printed on the Deepsea’s dial, then you will see”gas escape valve” printed on it. The gas escape valve is just one of the most important creations of Rolex. In fact, this technology upped the game for dive watches. A lot of divers discovered the crystal of the watches popping off, to give you an overview. This was a result of the helium molecules which penetrate the watch’s case through the gaskets. The gas fails to escape the case of the watch, Even though there is a diver about the decompression stage. Thus, causing the crystal the watch like a champagne cork. As a solution to the problem, Rolex devised a valve. It allows the gas trapped at the watch to escape at a strain while the diver is about the decompression process. All while preserving the watch’s case’s waterproofness.